Range Rover: Selecting access height - Air suspension - Range Rover Owner's ManualRange Rover: Selecting access height

To select access height from normal height, press down on the raise/lower switch. To select access height from Off-road height, press down on the switch once, and then a second time while lowering is in progress. ACCESS HEIGHT SELECTED will be displayed in the message center.

If the vehicle speed is greater than 12 mph (20 km/h), the system will wait for the speed to decrease. If it does not fall below this speed within 1 minute, the height change will be cancelled.

Once the speed falls below 12 mph (20 km/h) the vehicle will be partly lowered. When the speed falls below 5 mph (8 km/h) within 1 minute, full access height will be reached.

Note: Access height may be selected up to 40 seconds after the ignition is switched off, provided the driver’s door has not been opened.

When vehicle speed rises above 6 mph (10 km/h), the vehicle will return to the height access height was selected from.

    Extended off-road height
    If grounded in severe off-road conditions, the system may automatically enter Extended mode. The off-road height indicator flashes and a message will be displayed in the message center. In extende ...

    Crawl mode (locked access height)
    When the vehicle is at Normal height and traveling less than 22 mph (35 km/h), or at Access height, press down on the raise/lower switch for longer than 3 seconds to lock the vehicle at access hei ...

    See also:

    Dashboard fuse box
    Do not use a pointed object such as a screwdriver to open the cover in the dashboard. You could damage the dashboard or the cover. ► To open: pull cover 1 outwards in the direction ...

    Lower Anchors and Tethers for CHildren System (LATCH)
    LATCH system lower anchor locations - captain’s seats LATCH system lower anchor locations - bench seat Your vehicle is equipped with special anchor points that are used with the LA ...

    Memory Features
    On vehicles with the memory feature, the controls on the driver door are used to program and recall memory settings for the driver seat, outside mirrors, and power steering column, if available. ...