Mercedes-Benz GL-Class: Seat belt retractor
The inertia reel can be used to secure light loads against the side wall of the cargo compartment to prevent them from moving around.
► Insert two mounting elements 2 into a
loading rail.
► Turn mounting elements 2 in the loading
rail to 
.
► Insert inertia reel 3 into mounting
elements 2.
► Turn mounting element 2 to
until
you feel it clearly engage in the loading rail.
► Press unlocking button 1 on inertia reel 3
and pull the cargo net out in the
direction of the arrow.
► Place the load between the securing net
and the cargo compartment side wall.
► Using one hand, press locking button 1 of
inertia reel 3.
► With your other hand, slowly extend the
net
around the load until it is secure.
Inserting the cargo tie down rings intothe mounting
WARNING
Distribute the load on the cargo tie down rings
evenly. Please observe the loading guidelines.
► Turn mounting element 2 in the loading
rail to .
► Insert cargo ...
Telescopic rod
The telescopic rod can be used to secure the
load against the rear seats to prevent it from
moving around.
► Insert one mounting element 2 into each
loading rail.
► Turn mounting el ...
See also:
Voice guidance
To turn voice guidance on or off but maintain route guidance, proceed as follows:
1. Touch Nav menu on the map menu screen.
2. Touch the Route voice guidance soft key. The soft key will be highlight ...
Service Vehicle Messages
SERVICE A/C (Air Conditioning) SYSTEM
This message displays when the electronic sensors that control the air conditioning
and heating systems are no longer working.
Have the climate control system ...
Socket in the front-compartment centerconsole
If accessories are connected, make sure
that a maximum current draw of 15 A is not
exceeded. Otherwise, you will overload the
fuse.
The socket is not suitable for operating
the tire inflati ...
