Mercedes-Benz GL-Class: Seat belt adjustment
The seat-belt adjustment function adjusts the driver's and front-passenger seat belt to the upper body of the occupants.
The belt strap is tightened slightly when:
• you engage the belt tongue in the belt
buckle and you then turn the SmartKey to
position 2 in the ignition lock.
• the SmartKey is in position 2 in the
ignition
lock and you then engage the belt tongue
in the buckle.
The seat-belt adjustment will apply a retraction force if any slack is detected between the occupant and the seat belt. Do not hold on to the seat belt tightly while it is adjusting. You can switch the seat-belt adjustment on and off in the on-board computer.
The seat-belt adjustment is an integral part of the PRE-SAFE® convenience function. More information about PRE-SAFE® can be found in the "PRE-SAFE® (preventative occupant protection)" section.
Fastening seat belts
WARNING According to accident statistics, children are safer when properly restrained on the rear seats than on the front-passenger seat. Thus, we strongly recommend that children be ...Belt height adjustment
You can adjust the seat belt height on the driver's seat and the front-passenger seat. Adjust the height so that the upper part of the seat belt is routed across the center of your shoulder. ...See also:
Cleaning the touch screen
• Clean with a lightly moistened cloth.
• Do not use chemical agents or domestic cleaners.
• To prevent errors occurring, ensure that only one finger at a time is
in contact with the s ...
Garage door transceiver
CAUTION
Do not use the transceiver with any garage door opener that lacks the safety
stop and reverse feature as required by safety standards.
CAUTION
When programing the transceiver to ...
Injured persons
INFINITI recommends that injured persons
use seat belts, depending on the injury.
Check with your doctor for specific recommendations. ...