Range Rover: Rock crawl - Terrain response - Range Rover Owner's ManualRange Rover: Rock crawl

This program should be used for terrain which is predominantly rocky, including

This program should be used for terrain which is predominantly rocky, including for crossing river beds with submerged rocks.

This program provides good low-speed control.

Rock crawl can only be selected in Low range. If the selection is made while in High range, the message center will prompt you to select Low range.

Dynamic

This program is associated with a driving style, rather than a type of terrain

This program is associated with a driving style, rather than a type of terrain and optimizes traction, handling and driveability, for maximum feedback and responsiveness. Select this program to exploit the vehicle’s full on-road potential.

Note: Dynamic mode automatically cancels if Low range is selected.

    Sand
    This program should be used for terrain which is predominantly soft dry sand or deep gravel. Note: If the vehicle is unable to gain traction in extremely soft, dry sand, switching DSC off may h ...

    Driver override options
    Hill Descent Control (HDC) is automatically engaged for some terrain response programs. If required, HDC can be deselected or engaged independently of terrain response. The HDC status will be dis ...

    See also:

    Switching off the engine
    Important safety notes WARNING   Do not turn off the engine before the vehicle has come to a complete stop. With the engine not running, there is no power assistance for the brake and s ...

    Rear towing point
    The rear towing point is located behind a removal panel in the lower rear bumper. The rear towing point may be used to tow another vehicle if required. 1. Rotate each of the fasteners 90 degrees ...

    Dome Lamps
    The dome lamps are located in the overhead console. They come on when any door is opened and turn off after all the doors are closed. Turn the instrument panel brightness knob located below the dome ...