Cadillac Escalade: Returning the Seat to the Sitting Position - Second Row Seats - Rear Seats - Seats and Restraints - Cadillac Escalade Owner's ManualCadillac Escalade: Returning the Seat to the Sitting Position

To return the seat to the sitting position from the tumbled position:

1. Pull the seat down until it latches to the floor. The seatback cannot be raised if the seat is not latched to the floor.

WARNING WARNING

If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked.

2. Lift the seatback and push it rearward. Push and pull on the seatback to make sure it is locked.

3. For the 60/40 split-bench seat, make sure the safety belt in the center seating position is not caught between the two seats and is not twisted.

    Automatic Fold and Tumble Feature
    The transmission must be in P (Park) for this feature to work. WARNING Automatically folding and tumbling the seat when someone is sitting in the seat, could cause injury to the person sitting ...

    Third Row Seats
    If the vehicle has a third row seat, the seatback can be folded, and the entire seat can be tumbled or removed from the vehicle. ...

    See also:

    Storing the current speed or calling upthe last stored speed
    WARNING   The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising ...

    Voice tutorial
    To listen to a tutorial detailing the operation of the Voice system: 1. Briefly press the Voice button to start a voice session. 2. Wait for the tone to sound, then say Voice tutorial. Alternativel ...

    RBDS-TMC overview
    Radio Data System-Traffic Message Channel (RDS-TMC) is a feature that announces traffic hold-ups on your route as broadcast by radio stations that transmit TMC information. Touch the TMC button on ...