Mercedes-Benz GL-Class: Replacing the rear window wiper blade
Removing the wiper blade
► Remove the SmartKey from the ignition
lock.
► Fold wiper arm 1 away from the rear
window until it engages.
► Position wiper blade 2 at a right angle to
wiper arm 1.
► Hold wiper arm 1 and press wiper
blade 2 in the direction of the arrow until
it releases.
► Remove wiper blade 2.
Installing the wiper blade
► Place new wiper blade 2 onto wiper
arm 1.
► Hold wiper arm 1 and press wiper
blade 2 in the opposite direction to the
arrow until it engages.
► Make sure that wiper blade 2 is seated
correctly.
► Position wiper blade 2 parallel to wiper
arm 1.
► Fold wiper arm 1 back onto the rear
window.
Replacing the windshield wiper blades
Removing the wiper blades
► Remove the SmartKey from the ignition
lock.
► Fold the wiper arm away from the
windshield.
► Press both release clips 2.
► Fold wiper blade ...
Problems with the windshield wipers
The windshield wipers are obstructed
Leaves or snow, for example, may be
obstructing the windshield wiper movement.
The wiper motor has been deactivated.
► For safety reasons, you should ...
See also:
Cleaning the display
► Before cleaning the display, make sure
that
it is switched off and has cooled down.
► Clean the display surface using a
commercially-available microfiber cloth
and TFT/LCD display ...
Bulb specification
NOTICE
Before attempting to replace a bulb, ensure that both the affected lamp and the
vehicle's ignition, are turned off. If the circuit remains live, a short circuit
can occur which ma ...
If your vehicle is stolen
If your vehicle is stolen, you should change
the codes of any non-rolling code device
that has been programmed into
HomeLink®. Consult the Owner’s Manual
of each device or call the manufact ...
