Infiniti QX: Replacing
Replace the wiper blades if they are worn. 1. Pull the wiper arm. 2. Push the release tab A , and then move the wiper blade down the wiper arm 1 while pushing the release tab to remove. 3. Insert the new wiper blade onto the wiper arm until a click sounds. 4. Rotate the wiper blade so the dimple is in the groove.
CAUTION
► After wiper blade replacement, return
the wiper arm to its original position;
otherwise it may be damaged when the
hood is opened.
► Make sure the wiper blades contact the
glass; otherwise the arm may be damaged
from wind pressure.
Be careful not to clog the washer nozzle A . This may cause improper windshield washer operation. If the nozzle is clogged, remove any objects with a needle or small pin B . Be careful not to damage the nozzle.
Cleaning
If your windshield is not clear after using
the windshield washer or if a wiper blade
chatters when running, wax or other
material may be on the blade or windshield.
Clean the outside of the w ...
Rear window wiper blades
Contact an INFINITI retailer if checking or
replacement is required. ...
See also:
Front Fog Lamp Light
The front fog lamp light comes on when the fog lamps are in use.
The light goes out when the fog lamps are turned off. See Fog Lamps
for more information. ...
Tire Changing
Removing Tools
The tools needed to remove the spare tire are located in the storage compartment
on the driver side, at the rear of the vehicle.
1. Open the jack storage compartment by pulling on t ...
Fuses and Circuit Breakers
The wiring circuits in your vehicle are protected from short circuits by a combination
of fuses, circuit breakers and fusible thermal links.
This greatly reduces the chance of fires caused by elect ...
