Buick Enclave: Remote Keyless Entry (RKE) System Operation - Keys and Locks - Keys, Doors, and Windows - Buick Enclave Owner's ManualBuick Enclave: Remote Keyless Entry (RKE) System Operation

The Remote Keyless Entry (RKE) transmitter functions work up to 60m (195 ft) away from the vehicle.

There are other conditions which can affect the performance of the transmitter. See Remote Keyless Entry (RKE) System .

and Power Liftgate Shown, Without Similar With Remote Start and Power Liftgate Shown, Without Similar

with this feature, see Remote Vehicle Start  for additional information. (Remote Vehicle Start): For vehicles with this feature, see Remote Vehicle Start  for additional information.

If enabled through the Driver Information Center (DIC), the parking lamps flash (Lock): Press to lock all the doors.

If enabled through the Driver Information Center (DIC), the parking lamps flash once to indicate locking has occurred. If enabled through the DIC, the horn sounds when See Vehicle Personalization  for additional information. is pressed again within five seconds. See Vehicle Personalization  for additional information.

Pressing system. may arm the content theft-deterrent system.

See Anti-theft Alarm System .

the driver door. If  is pressed again (Unlock): Press once to unlock only the driver door. If within five seconds, all remaining doors unlock. is pressed again within five seconds, all remaining doors unlock.

The interior lamps come on and stay on for 20 seconds or until the ignition is turned on.

If enabled through the DIC, the parking lamps flash twice to indicate unlocking has occurred. See Vehicle Personalization .

Pressing disarms the content theft-deterrent system. See Anti-theft Alarm System . on the RKE transmitter disarms the content theft-deterrent system. See Anti-theft Alarm System .

until the liftgate begins to move to open or close the liftgate. (Power Liftgate): Press and hold until the liftgate begins to move to open or close the liftgate.

The taillamps flash and a chime sounds to indicate when the liftgate is opening or closing.

until the liftgate begins to move to open or close the liftgate. (Power Liftgate): Press and hold until the liftgate begins to move to open or close the liftgate.

The taillamps flash and a chime sounds to indicate when the liftgate is opening or closing.

Press and hold seconds to activate the panic alarm. The parking lamps flash and the horn sounds for more than two seconds to activate the panic alarm. The parking lamps flash and the horn sounds repeatedly for 30 seconds. The alarm turns off when the ignition is moved to ON/RUN or The ignition must be in LOCK/OFF for the panic alarm to work. is pressed again.

The ignition must be in LOCK/OFF for the panic alarm to work.

Programming Transmitters to the Vehicle

Only RKE transmitters programmed to this vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer. When the replacement transmitter is programmed to this vehicle, all remaining transmitters must also be reprogrammed.

Any lost or stolen transmitters will no longer work once the new transmitter is programmed.

Each vehicle can have up to eight transmitters programmed to it.

See your dealer to program transmitters to this vehicle.

Battery Replacement

Replace the battery if the REPLACE BATTERY IN REMOTE KEY message displays in the DIC.

Notice: When replacing the battery, do not touch any of the circuitry on the transmitter.

Static from your body could damage the transmitter.

1. Separate the transmitter with a flat, thin object, such as a flat head screwdriver.

1. Separate the transmitter with a flat, thin object, such as a flat head screwdriver.

► Carefully insert the tool into the notch located along the parting line of the transmitter. Do not insert the tool too far. Stop as soon as resistance is felt.

► Twist the tool until the transmitter is separated.

2. Remove the old battery. Do not use a metal object.
3. Insert the new battery, positive side facing down. Replace with a CR2032 or equivalent battery.
4. Snap the transmitter back together.

    Remote Keyless Entry (RKE) System
    See Radio Frequency Statement  for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310. If there is a decrease ...

    Remote Vehicle Start
    This vehicle may have a remote starting feature that starts the engine from outside of the vehicle. (Remote Start): This button is located on the RKE transmitter if the vehicle has remote start. ...

    See also:

    Auto high beam
    This feature automatically selects and deselects high beam, under specific conditions of road lighting and in the absence of other vehicle’s lights. The system is only active when the ambient li ...

    Installing the Third Row Seat
    To install the seat: 1. Open the liftgate to access the rear of the vehicle. 2. Slide the front outboard seat wheels into the track on the floor and roll the seat forward. The front latches should ...

    Cleaning the interior
    CAUTION Some cleaning products contain substances that are harmful and can cause health problems if used incorrectly and may cause damage to the interior. ...