Range Rover: Range changing on the move
The recommended method of changing range is with the vehicle stationary. For experienced off-road drivers, a range change on-the-move can be accomplished, as detailed below.
Range change indicators
In Hi, the Hi range switch indicator is illuminated. In Lo, the green warning lamp in the instrument pack and the Lo range switch indicator are illuminated. While a range change is in progress, ...Automatic transmission high to low range
1. With the vehicle slowing down, and traveling between 24 mph (40 km/h) and 2 mph (3 km/h), select N. 2. Press the rear of the transfer gearbox switch to select Lo. 3. Wait for the range ch ...See also:
Matte finish care
If your vehicle has a clear matte finish,
observe the following instructions in order to
avoid damage to the paintwork due to
incorrect care.
These notes also apply to light alloy wheels
with a ...
Turn and Lane-Change Signals
An arrow on the instrument panel cluster flashes in the direction of the turn
or lane change.
Move the lever all the way up or down to signal a turn.
Raise or lower the lever until the arrow sta ...
Gasoline
Fuel grade
You should only refuel with unleaded
premium-grade gasoline as this avoids
damaging the catalytic converter.
If engine running problems are apparent,
have the cause checked immedia ...