Cadillac Escalade: Programming the Power Windows
If the battery on the vehicle has been recharged, disconnected, or is not working, you will need to reprogram each front power window for the express-up feature to work. Before reprogramming, replace or recharge the vehicle's battery.
To program each front window, follow these steps:
1. With the ignition in ACC/ ACCESSORY, ON/RUN, or when RAP is active, close all doors.
2. Press and hold the power window switch until the window is fully open.
3. Pull the power window switch up until the window is fully closed.
4. Continue holding the switch up for approximately two seconds after the window is completely closed.
The window is now reprogrammed. Repeat the process for the other windows.
Express Window Anti-Pinch Override
WARNING
If express override is activated, the window will not reverse automatically.
You or others could be injured and the window could be damaged. Before you use express
override, make sure t ...
Window Lockout
This feature prevents the rear passenger windows from operating, except from
the driver position.
Press to activate the rear
window locks. An indicator light will illuminate when the feature ...
See also:
Call volume
The phone call volume is operated by the audio system’s volume control.
If the audio system is in use when a phone call is active, the audio system source
is suppressed for the duration of the ca ...
Standard display
► Press the
button on the
steering wheel to select the standard
display.
Standard display
1 Trip odometer
2 Odometer
You can select the following functions in the
Standard display men ...
Inserting the mounting elements intothe loading rail
You can slide mounting element 2 in loading
rail 1 to various detents and secure it. These
detents are marked and positioned at 5-cm
intervals along loading rail 1.
You can turn mounting eleme ...
