Mercedes-Benz GL-Class: Opening/closing the garage door
Once programmed, the integrated garage door opener will assume the function of the garage door system's remote control. Please also read the operating instructions for the garage door system.
► Turn the SmartKey to position 2 in the
ignition lock.
► Press transmitter button 2, 3 or 4 in the
overhead control panel that you have
programmed to operate the garage door.
Garage door system with a fixed code:
indicator lamp 1 lights up green.
Garage door system with a rolling code:
indicator lamp 1 flashes green.
The transmitter will transmit a signal for as long as the transmitter button is being pressed. After a maximum of ten seconds, transmission is terminated and indicator lamp 1 flashes yellow. Press the transmitter button again, if necessary.
Programming the integrated garagedoor opener on the rear-view mirror
Programming WARNING Only press the transmitter button on the integrated garage door opener if there are no persons or objects present within the sweep of the garage door. People could ...Clearing the memory of the integratedgarage door opener on the rear-viewmirror
► Turn the SmartKey to position 2 in the ignition lock. ► Press transmitter buttons 2 and 4. The indicator lamp lights up yellow. ► Press and hold transmitter buttons 2 and 4 ...See also:
Replacing the rear window wiper blade
Removing the wiper blade
► Remove the SmartKey from the ignition
lock.
► Fold wiper arm 1 away from the rear
window until it engages.
► Position wiper blade 2 at a right angle ...
Vehicle remote opening
If you have unintentionally locked your
vehicle (e.g. the SmartKey is still in the
vehicle) and a replacement SmartKey is not
available, the vehicle can be opened by a
Mercedes-Benz Customer Assis ...
Towing your vehicle
When towing your vehicle, all State (Provincial
in Canada) and local regulations for
towing must be followed. Incorrect towing
equipment could damage your vehicle.
Towing instructions are avai ...