Infiniti QX: Opening and closing windows with the mechanical key
The driver’s door key operation also allows you to open and close all door windows. To open the windows, turn the driver’s door key cylinder to the rear of the vehicle for longer than 1 second. The door is unlocked and the window keeps opening while turning the key. This function can also be performed by pushing and holding the door UNLOCK button of the Intelligent Key. (See “Remote keyless entry system” later in this section.). To close the windows, turn the driver’s door key cylinder to the front of the vehicle for longer than 1 second. The door is locked and the window keeps closing while turning the key.
Locking with mechanical key
The power door lock system allows you to
lock or unlock all doors simultaneously
using the mechanical key.
► Turning the driver’s door key cylinder to
the front of the vehicle 1 will ...
Locking with inside lock knob
To lock the door individually, move the
inside lock knob to the lock position 1 .
To unlock, move the inside lock knob to the
unlock position 2 .
Be sure not to leave the Intelligent Key
in ...
See also:
Adaptive dynamics
If the general warning lamp illuminates and the message ADAPTIVE DYNAMICS FAULT
is displayed in the message center, some reduction in ride comfort may be experienced.
If the fault persists, cons ...
California Fuel Requirements
If the vehicle is certified to meet California Emissions Standards, it is designed
to operate on fuels that meet California specifications.
See the underhood emission control label. If this fuel is ...
DISTRONIC displays in thespeedometer
When DISTRONIC is activated, one or
two segments in the set speed range light up.
For design reasons, the speed displayed
in the speedometer may differ slightly from
the speed set for DISTRON ...






