Cadillac Escalade: Off-Road Driving
All-wheel-drive vehicles can be used for off-road driving. Vehicles without all-wheel drive and vehicles not equipped with All Terrain (AT) or On-Off Road (OOR) tires must not be driven off-road except on a level, solid surface. To contact the tire manufacturer for more information about the original equipment tires, see the Limited Warranty and Owner Assistance Information manual.
Controlling the vehicle is the key to successful off-road driving. One of the best ways to control the vehicle is to control the speed.
WARNING
When driving off-road, bouncing and quick changes in direction can easily throw you out of position. This could cause you to lose control and crash. You and your passengers should always wear safety belts.
- Before Driving Off-Road
- Loading the Vehicle for Off-Road Driving
- Environmental Concerns
- Driving on Hills
- Driving in Mud, Sand, Snow, or Ice
- Driving in Water
- After Off-Road Driving
Skidding
There are three types of skids that correspond to the vehicle's three control
systems:
Braking Skid — wheels are not rolling.
Steering or Cornering Skid — too much speed or steering in ...
Before Driving Off-Road
Have all necessary maintenance and service work completed.
Fuel the vehicle, fill fluid levels, and check inflation pressure in all
tires, including the spare, if equipped.
Read all the infor ...
See also:
Roadside Service (Mexico)
As a new owner, your vehicle is automatically enrolled in the Roadside Assistance
program. The services are available at no cost under the terms and conditions of
the program. The Roadside Assistanc ...
Fuse box in the engine compartment
► Open the hood.
Illustrated: GL 450 (GL 350 BlueTEC, GL 550 are
similar)
► Remove any existing moisture from the
fuse box using a dry cloth.
► To open: open clamps 2.
` ...
Extended off-road height
If grounded in severe off-road conditions, the system may automatically enter
Extended mode. The off-road height indicator flashes and a message will be displayed
in the message center. In extende ...






