Mercedes-Benz GL-Class: Multifunction display
Values and settings as well as display messages are shown in the multifunction display.
1 Trip odometer
2 Odometer
3 Transmission position
4 Status bar with outside temperature or
speed
For further information on displaying the transmission position, see.
Operating the on-board computer
The on-board computer is activated as soon as you turn the SmartKey to position 1 in the ignition lock. You can control the multifunction display and the settings in the on-board computer using ...See also:
Hazard warning flasher switch
Push the switch on to warn other drivers
when you must stop or park under
emergency conditions. All turn signal lights
will flash.
WARNING
► If stopping for an emergency, be sure to ...
Rocking Your Vehicle to Get It Out
Turn the steering wheel left and right to clear the area around the front wheels.
Turn off any traction or stability system. Shift back and forth between R (Reverse)
and a forward gear, spinning the ...
Washing
Wash dirt off the vehicle with a wet sponge
and plenty of water. Clean the vehicle
thoroughly using a mild soap, a special
vehicle soap or general purpose dishwashing
liquid mixed with clean, ...