Mercedes-Benz GL-Class: Mounting a new wheel - Changing a wheel and mounting thespare wheel - Flat tire - Breakdown assistance - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Mounting a new wheel

WARNING Always replace wheel bolts that are damaged 
Always replace wheel bolts that are damaged or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be repaired immediately. Do not continue to drive under these circumstancesauthorized Mercedes-Benz Center or call Contact an authorized Mercedes-Benz Center or call Roadside Assistance.
Incorrect wheel bolts or improperly tightened wheel bolts can cause the wheel to come off.
This could cause an accident. Make sure to use the correct wheel bolts.

WARNING Only use genuine Mercedes-Benz wheel bolts. 
Only use genuine Mercedes-Benz wheel bolts.
Other wheel bolts may come loose.
Do not tighten the wheel bolts when the vehicle is raised. Otherwise, the vehicle could fall off the jack.

1 Wheel bolts for 19", 20" and 21" wheels

1 Wheel bolts for 19", 20" and 21" wheels
2 Wheel bolts for the "Minispare"emergency spare wheel

"Minispare" emergency spare wheel. Using Always use wheel bolts 2 to mount the "Minispare" emergency spare wheel. Using other wheel bolts to mount the "Minispare" emergency spare wheel could damage the brake system.

WARNING Make sure to use the original length wheel 
Make sure to use the original length wheel bolts when remounting the original wheel after it has been repaired.

Clean the wheel and wheel hub contact surfaces.

the wheel securely against the wheel hub To prevent damage to the paintwork, hold the wheel securely against the wheel hub while screwing in the first wheel bolt.

► Slide the emergency spare wheel onto

Slide the emergency spare wheel onto the alignment bolt and push it on.
Tighten the wheel bolts until they are finger-tight.
Unscrew the alignment bolt.
Tighten the last wheel bolt until it is fingertight.

    Removing a wheel
    ► Unscrew the uppermost wheel bolt completely. ► Screw alignment bolt 1 into the thread instead of the wheel bolt. ► Unscrew the remaining wheel bolts fully. Do not place wh ...

    Lowering the vehicle
    ► Place the ratchet wrench onto the hexagon nut of the jack so that the letters AB are visible. ► Turn the ratchet wrench until the vehicle is once again standing firmly on the gro ...

    See also:

    Settings for Parental Control
    Use the SETUP MENU to access the parental control feature. It allows for control of the type of movie rating content (from G to Adult) that can be viewed and is only accessible when no disc is loade ...

    Root Directory
    The root directory of the disc is treated as a folder. If the root directory has compressed audio files, the directory displays on the radio as the CD label. If a disc contains both uncompressed CD ...

    Underbody
    In areas where road salt is used in winter, the underbody must be cleaned regularly. This will prevent dirt and salt from building up and causing the acceleration of corrosion on the underbody ...