Cadillac Escalade: Manual Operation
(Fan Control): Press these buttons
on the rear seat audio control panel to increase or decrease the airflow. Pressing
the fan up button when the system is off will turn the system on. The air delivery
mode will remain under automatic control.
+ or − (Temperature Control): Press these buttons to adjust the temperature of the air flowing into the passenger area. Press the + button for warmer air and press the − button for cooler air.
(Air Delivery Mode Control): Press
the mode button to change the direction of the airflow in the vehicle. Repeatedly
press the button until the desired mode appears on the display. Multiple presses
will cycle through the delivery selections.
Automatic Operation, If Equipped
AUTO: Press the air delivery mode button until this setting is selected to control
the inside temperature, air delivery, and fan speed. AUTO appears in the display
when automatic operation is active ...
Air Vents
Use the air outlets located in the center and on the side of the instrument panel
to direct the airflow.
Operation Tips
Keep the hood and front air inlets free of ice, snow, or any other obstruc ...
See also:
Tire Pressure Light
For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on
briefly when the engine is started. It provides information about tire pressures
and the TPMS
When the Light Is On ...
Storing settings
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
• position of the seat, ...
Connecting a USB Storage Device or iPod®
To connect a USB storage device, connect the device to the USB port located in
the instrument panel storage area. See Instrument Panel Storage for more information.
The USB port can be used ...






