Cadillac Escalade: Manual Fold and Tumble Feature
Folding and Tumbling the Seat
To fold and tumble the seat:
1. Make sure that there is nothing under, in front of, or on the seat.
Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat.
2. Lift the lever, on the outboard side of the seat, to release the seatback.
The seatback will fold forward to create a flat load floor.
If the seatback cannot fold flat, try moving the front seat forward and/or put the front seatback in the upright position.
3. Lift the lever again to release the rear of the seat from the floor. The seat will tumble forward.
Reclining Seatbacks (Bucket Seats Only)
On vehicles with second row bucket seats, the seatbacks can be reclined. To recline the seatback: 1. Lift the lever on the outboard side of the seat. 2. Move the seatback to the desired position, ...Folding and Tumbling the Seat from the Third Row Seat
WARNING Using the third row seating position while the second row is folded, or folded and tumbled, could cause injury in a sudden stop or crash. Be sure to return the seat to the passenger sea ...See also:
Portable media
WARNING
Do not adjust the auxiliary device or allow the device to distract the driver
while the vehicle is moving. Driver distraction can lead to accidents causing serious
injury or death.
...
Bulb Replacement
For the proper type of replacement bulbs, see Replacement Bulbs .
For any bulb-changing procedure not listed in this section, contact your dealer. ...
Changing the settings of the lockingsystem
You can change the setting of the locking
system in such a way that only the driver's
door and the fuel filler flap are unlocked. This
is useful if you frequently travel on your own.
► To ch ...