Mercedes-Benz GL-Class: Low-beam headlamps (halogenheadlamps)

► Switch off the lights.
► Open the hood.
► Turn housing cover 1 counter-clockwise
and pull it out.
► Turn bulb holder 2 counter-clockwise and
pull it out.
► Take the bulb out of bulb holder 2.
► Insert the new bulb into bulb holder 2.
► Insert bulb holder 2 into the lamp and
turn
it clockwise.
► Align housing cover 1 and turn it
clockwise until it engages.
High-beam headlamps
► Switch off the lights.
► Open the hood.
► Turn housing cover 1
counter-clockwise
and pull it out.
► Turn bulb holder 2
counter-clockwise and
pull it out.
► ...
See also:
Safety Belt Care
Keep belts clean and dry.
WARNING
Do not bleach or dye safety belts.
It may severely weaken them.
In a crash, they might not be able to provide adequate protection.
Clean safety belts only with m ...
Rear lamp removal
To change any of the rear bulbs, it is necessary to completely remove the lamp
unit from the vehicle.
1. With the tailgate open, remove the two screws from the inner edge of the unit.
2. Pull th ...
Precautions when starting and driving
WARNING
► Do not leave children or adults who
would normally require the support of
others alone in your vehicle. Pets should
not be left alone either. They could
accidentally injure ...







