Range Rover: Locking and arming the alarm - Exiting the vehicle - Range Rover Owner's ManualRange Rover: Locking and arming the alarm

WARNING WARNING

Before exiting the vehicle, always ensure that the gear selector is in the Park (P) position, the engine is turned off, the parking brake is applied and the Smart Key is removed from the vehicle.

Press the lock button on the Smart Key briefly, to lock the vehicle and activate the perimeter alarm. The hazard warning lamps will flash to confirm.

The perimeter alarm will sound if:

  • • The hood, tailgate or a door are opened.
  • • The vehicle battery is disconnected.
  • • An attempt is made to disconnect the alarm siren.
    Keyless locking
    The vehicle will not lock automatically. To lock the vehicle press the keyless locking button (arrowed) on the door handle once. The hazard warning lamps will flash once to confirm. In some marke ...

    See also:

    Reading Lamps
    For vehicles with reading lamps in the overhead console, press the button located next to the lamp to turn it on or off. The vehicle may also have reading lamps in other locations. The lamps cannot ...

    Injured persons
    INFINITI recommends that injured persons use seat belts, depending on the injury. Check with your doctor for specific recommendations. ...

    Vehicle Dynamic Control (VDC) OFF switch
    The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions. If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to ...