Mercedes-Benz GL-Class: Inserting the mounting elements intothe loading rail
You can slide mounting element 2 in loading rail 1 to various detents and secure it. These detents are marked and positioned at 5-cm intervals along loading rail 1.
You can turn mounting element 2 of loading rail : to four positions:
To lock the mounting element
To release the cargo tie-down
ring, the
inertia reel or the telescopic rod
To remove the mounting element
To push the mounting element to
the
next detent
► Turn mounting element 2 to
.
► Insert mounting element 2 into loading
rail 1.
► Turn mounting element 2 to
until
you feel it clearly engage in loading rail 1.
Components and storage
The EASY-PACK load-securing kit allows you to use your cargo compartment for a variety of purposes. You can keep the EASY-PACK load-securing kit in the bag supplied and store it together with the ...Inserting the cargo tie down rings intothe mounting
WARNING Distribute the load on the cargo tie down rings evenly. Please observe the loading guidelines. ► Turn mounting element 2 in the loading rail to . ► Insert cargo ...See also:
Manual Operation
(Fan Control): Press these buttons
on the rear seat audio control panel to increase or decrease the airflow. Pressing
the fan up button when the system is off will turn the system on. The air deliv ...
Loss of Control
Skidding
There are three types of skids that correspond to the vehicle's three control
systems:
► Braking Skid — wheels are not rolling.
► Steering or Cornering Skid — too muc ...
Automatic Door Locks
Vehicles with an automatic lock/unlock feature enable you to program the vehicle's
power door locks. This feature can be programmed through the Driver Information
Center (DIC).
See Vehicle Pe ...