Infiniti QX: In-cabin microfilter
Models without Advanced Climate Control System:
The climate control system is equipped with an in-cabin microfilter which collects dirt, pollen, dust, etc. To make sure the air conditioner heats, defogs, and ventilates efficiently, replace the filter in accordance with the maintenance schedule in the INFINITI Service and Maintenance Guide. To replace the filter, contact an INFINITI retailer. The filter should be replaced if air flow is extremely decreased or when windows fog up easily when operating heater or air conditioning system. Models with Advanced Climate Control System: The climate control system is equipped with a natural grape seed polyphenol filter which collects and neutralizes dirt, pollen, dust, etc. To make sure that the air conditioner heats, defogs and ventilates efficiently, replace the filter in accordance with the maintenance schedule in the INFINITI Service and Maintenance Guide. To replace the filter, contact an INFINITI retailer. The filter should be replaced if the air flow decreases significantly or if windows fog up easily when operating the heater or air conditioner.
Linking intelligent key
The Climate control system settings can be
memorized for each Intelligent Key. For
more details, see “Setting memory function”
in the “3. Pre-driving checks and
adjustments” section. ...
Servicing climate control
The climate control system in your INFINITI
is charged with a refrigerant designed with
the environment in mind. This refrigerant
will not harm the earth’s ozone layer.
However, special char ...
See also:
Setting DSR
With the DSR speed function, you can set the
speed of DSR (the speed for driving downhill) to a value between 3 mph (Canada: 4 km/h) and 10 mph (Canada:
18 km/h). The adjustments are made in
1-mp ...
Socket in the cargo compartment
The socket is not suitable for operating
the tire inflation compressor.
► Lift up the cover of socket 1. ...
Changing engine oil and filter
Vehicle set-up
1. Park the vehicle on a level surface and
apply the parking brake.
2. Run the engine until it reaches operating
temperature.
3. Turn the engine off and wait more than
15 min ...