Cadillac Escalade: If the On Indicator is Lit for a Child Restraint
If a child restraint has been installed and the on indicator is lit:
1. Turn the vehicle off.
2. Remove the child restraint from the vehicle.
3. Remove any additional items from the seat such as blankets, cushions, seat covers, seat heaters, or seat massagers.
4. Reinstall the child restraint following the directions provided by the child restraint manufacturer and refer to Securing Child Restraints (Rear Seat Position) or Securing Child Restraints (Right Front Seat Position) or Securing Child Restraints (Center Front Seat Position) .
5. If, after reinstalling the child restraint and restarting the vehicle, the on indicator is still lit, turn the vehicle off. Then slightly recline the vehicle seatback and adjust the seat cushion, if adjustable, to make sure that the vehicle seatback is not pushing the child restraint into the seat cushion.
Also make sure the child restraint is not trapped under the vehicle head restraint. If this happens, adjust the head restraint. See Head Restraints .
6. Restart the vehicle. The passenger sensing system may or may not turn off the airbag for a child in a child restraint depending upon the child’s seating posture and body build. It is better to secure the child restraint in a rear seat.
Passenger Sensing System
If the vehicle has the passenger airbag status indicator pictured in the following
illustration, then the vehicle has a passenger sensing system for the right front
passenger position. The passenger ...
If the Off Indicator is Lit for an Adult-Size Occupant
If a person of adult size is sitting in the right front passenger seat, but the
off indicator is lit, it could be because that person is not sitting properly in
the seat. If this happens, use the ...
See also:
Warning systems switch (if so equipped)
The warning systems switch is used to turn
on and off the warning systems (Forward
Collision Warning (FCW), Lane Departure
Warning (LDW) and Blind Spot Warning
(BSW) systems) that are activa ...
Lumbar Adjustment
Manual Lumbar
If available, move the handle forward or rearward to increase or decrease lumbar
support.
Power Lumbar
If available, press and hold the front or rear of control to incre ...
Adjusting the head restraint height(second and third row of seats)
Outer seat head restraints in the second row of
seats
Outer seat head restraints in the third row of seats
► If the head restraint is fully lowered,
it is
necessary to press release ...