Range Rover: If the engine fails to start - Starting the engine - Range Rover Owner's ManualRange Rover: If the engine fails to start

If the vehicle has been unlocked using the emergency key blade or the Smart Key is not detected by the vehicle, it will be necessary to use the keyless start backup to disarm the alarm and start the engine.

The keyless start backup can only be used when the message Smart Key Not Found Place As Shown is displayed in the message center.

Position the Smart Key against the underside of the steering column cover with

Position the Smart Key against the underside of the steering column cover with the buttons facing downwards.

Note: There are markings on the cover to help locate the correct position.

When the Smart Key is positioned in this area, it will be recognized by the vehicle and the message Smart Key recognized will be displayed in the message center.

Holding the Smart Key in position and the brake pedal depressed, press and release the START/STOP button to start the engine.

Once the engine has been started, you no longer need to hold the Smart Key against the steering column cover.

Note: If the Smart Key is not recognized or the engine still fails to start, consult your Land Rover Retailer/ Authorized Repairer.

If the engine persistently fails to start, make sure the transmission is in P or N and press the START/STOP button (without applying the brake pedal) to switch on the ignition. Slowly depress the accelerator pedal fully, then hold it in the fully down position and press the START/STOP button with the brake pedal applied. The engine will then begin to crank. Release the accelerator pedal when the engine starts.

If the engine fails to crank, or fails to start, consult your Land Rover Retailer/Authorized Repairer.

    Starting the engine
    WARNING Never start the engine and leave it running when the vehicle is in an enclosed space. Exhaust gases are poisonous and can cause unconsciousness and death if inhaled. NOTICE The ...

    Switching off the engine
    Before stopping the engine, ensure that the vehicle is parked safely with the parking brake applied and P selected. Press and release the engine START/STOP button to stop the engine. The audio, t ...

    See also:

    Operating range for engine start function
    The operating range for starting the engine inside the vehicle 1 is shown in the illustration. ► If the Intelligent Key is on the instrument panel, cargo area, inside the glove box o ...

    Installing top tether strap (2nd row captain’s seats or 2nd row bench seat)
    2nd row bench seat First, secure the child restraint with the LATCH lower anchors (2nd row captain’s or bench outboard seating positions only) or the seat belt, as applicable. 1. If ...

    Obstacle Detection Features
    If the liftgate encounters an obstacle during a power open or close cycle, a warning chime will sound and the liftgate will automatically reverse direction to the full closed or open position. After ...