Infiniti QX: How to switch the display - Around ViewTM Monitor - Monitor, climate, audio, phone and voice recognition systems - Infiniti QX Owner's ManualInfiniti QX: How to switch the display

The Around View Monitor display consists of the left and the right screens. You can see a combination of different views on the screens as illustrated above.

Starting with the selector lever operation

► When the selector lever is shifted into the R (Reverse) position 1 while another screenA is displayed, Around View Monitor operates and the rearview and bird-eye view B are displayed. The Around View Monitor screen switches to the previous screen when the selector is shifted out of the R (Reverse) position 2 .
► The view on the screen on the passenger’s side switches to the front-side view C when the CAMERA button is pushed 3 . When the CAMERA button is pushed again5 , the rear-wide view D is displayed. When the CAMERA button is pushed again7 , the view on the screen on the passenger’s side switches to the bird-eye view B . The passenger’s side screen returns to another by operating the same procedures again. When selecting the “Wide”, “Side” or “Top” key on the screen using the INFINITI controller and pushing the ENTER button, the view on the screen will change to the one previously selected 4 , 6 , 8 .
► Once you have changed the view on the screen on the passenger’s side, the view on the driver’s side will change to the front view by shifting the selector lever out of the R (Reverse) position12 , 14 . When the selector lever is moved to any other position than the R (Reverse) position while the rear-wide view D is displayed, another view that is set to a higher priority will be displayed 16 .

Starting with the CAMERA button operation

► When the CAMERA button is pushed 9 while another screen A is displayed, Around View Monitor operates and the front view and bird-eye view E are displayed.
► The view on the screen on the passenger’s side switches to the front-side view F when the CAMERA button is pushed 10 . When the CAMERA button is pushed again 17 , the screen A is displayed.
► When selecting the “Side” or “Top” key on the screen using the INFINITI controller and pushing the ENTER button, the view on the screen will change to the one previously selected 11 .
► The left screen switches to the rearview B , C when the selector lever is shifted into the R (Reverse) position 13 , 15 and returns to the front view E , F when the selector lever is shifted out of the R (Reverse) position 12 , 14 .
► Push another button on the control panel to quit the Around View Monitor.

    Around ViewTM Monitor
    When you push the CAMERA button or shift the selector lever into the R (Reverse) position while the ignition switch is in the ON position, the Around View Monitor operates. The monitor display ...

    How to see each view
    WARNING ► The distance guide line and the vehicle width line should be used as a reference only when the vehicle is on a paved, level surface. The distance viewed on the monitor is fo ...

    See also:

    What to Use
    Refer to Recommended Fluids and Lubricants   to determine what kind of lubricant to use. ...

    Securing the Child Within the Child Restraint
    WARNING A child can be seriously injured or killed in a crash if the child is not properly secured in the child restraint. Secure the child properly following the instructions that came with th ...

    Ruts and gravel roads
    Observe the following rules when driving along ruts in off-road terrain or on roads with loose gravel: Check that the ruts are not too deep and that your vehicle has sufficient clearance. O ...