Cadillac Escalade: How to Check Lubricant
To get an accurate reading, the vehicle should be on a level surface.
A. Drain Plug
B. Fill Plug
If the level is below the bottom of the fill plug hole, located on the transfer case, some lubricant will need to be added. Add enough lubricant to raise the level to the bottom of the fill plug hole. Use care not to overtighten the plug.
When to Check Lubricant
Refer to Maintenance Schedule to determine how often to check the
lubricant. ...
What to Use
Refer to Recommended Fluids and Lubricants to determine what kind
of lubricant to use. ...
See also:
Changing engine oil and filter
Vehicle set-up
1. Park the vehicle on a level surface and
apply the parking brake.
2. Run the engine until it reaches operating
temperature.
3. Turn the engine off and wait more than
15 min ...
Emergency engine shut off
To shut off the engine in an emergency
situation while driving, perform the following
procedure:
► Rapidly push the push-button ignition
switch 3 consecutive times in less than
1.5 sec ...
Vehicle defects (Canada)
If you believe that your vehicle has a defect which could cause a crash or could
cause injury or death, you should immediately inform Transport Canada, in addition
to notifying Jaguar Land Rover C ...
