Infiniti QX: Hood - Pre-driving checks and adjustments - Infiniti QX Owner's ManualInfiniti QX: Hood

1. Pull the hood lock release handle 1

1. Pull the hood lock release handle 1 located below the instrument panel; the hood will then spring up slightly. 2. Pull the lever 2 up at the front of the hood with your fingertips and raise the hood. 3. When closing the hood, slowly close the hood down and make sure it locks into place.

► Make sure the hood is completely closed WARNING

► Make sure the hood is completely closed and latched before driving. Failure to do so could cause the hood to fly open and result in an accident.
► If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood.

    Remote keyless entry system
    WARNING The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that radio waves may affect aircraft navigation and communication systems. Do not operate the ...

    Lift gate
    WARNING ► Always be sure the lift gate has been closed securely to prevent it from opening while driving. ► Do not drive with the lift gate open. This could allow dangerous exha ...

    See also:

    Setting DSR
    With the DSR speed function, you can set the speed of DSR (the speed for driving downhill) to a value between 3 mph (Canada: 4 km/h) and 10 mph (Canada: 18 km/h). The adjustments are made in 1-mp ...

    Tumbling the Third Row Seat
    To tumble the seat: 1. Open the liftgate to access the controls for the seat. 2. Make sure the headrests are completely lowered and there is nothing under, in front of, or on the seat. 3. Fold the ...

    How to select menus on the screen
    Vehicle functions are viewed on the display screen in menus. To select each key item, highlight the preferred item using the INFINITI controller and push the ENTER button. Whenever a menu ...