Range Rover: Hints on driving with ACC
The system acts by regulating the speed of the vehicle, using engine control and the brakes. Gear changes may occur in response to deceleration or acceleration while in ACC.
ACC is not a collision avoidance system. However, during some situations the system may provide the driver with an indication that intervention is required.
An audible alarm will sound, accompanied by the message DRIVER INTERVENE if the ACC detects:
- • A failure has occurred while the system is active.
- • That using maximum ACC braking only is not sufficient.
Note: ACC operates when the gear selector lever is in position D.
Note: When engaged, the accelerator pedal rests in the raised position. Fully release the pedal to allow normal ACC operation.
Note: When braking is applied by the ACC, the vehicle brake lamps will be switched on.
Resuming the speed and follow mode
NOTICE
RESUME should only be used if the driver is aware of the set speed and intends
to return to it.
By pressing the RESUME button after ACC has been cancelled (e.g. after braking),
the A ...
Detection beam issues
Detection issues can occur:
1. When driving on a different line to the vehicle in front.
2. When a vehicle edges into your lane. The vehicle will only be detected once
it has moved fully into yo ...
See also:
Ending Cruise Control
There are three ways to end cruise control:
To disengage cruise control, step lightly on the brake pedal.
Press on the steering wheel.
To turn off the cruise control, press
on the steering ...
Brakes
If the brakes do not operate properly, have
the brakes checked by an INFINITI retailer. ...
How to use STATUS button
To display the status of the audio, air
conditioner system, fuel consumption and
navigation system, push the STATUS button.
The following information will appear
when the STATUS button is push ...
