Buick Enclave: High Voltage Devices and Wiring - Electrical System - Vehicle Care - Buick Enclave Owner's ManualBuick Enclave: High Voltage Devices and Wiring

Exposure to high voltage can cause shock, burns, and even death. The high voltageWARNING
Exposure to high voltage can cause shock, burns, and even death. The high voltage components in the vehicle can only be serviced by technicians with special training.

High voltage components are identified by labels. Do not remove, open, take apart, or modify these components.

High voltage cable or wiring has orange covering. Do not probe, tamper with, cut, or modify high voltage cable or wiring.

    Electrical System Overload
    The vehicle has fuses and circuit breakers to protect against an electrical system overload. When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the ci ...

    See also:

    Exterior Lamp Controls
    The exterior lamps control is located on the instrument panel to the left of the steering wheel. It controls the following systems: ► Headlamps ► Taillamps ► Parking Lamps & ...

    License Plate Lamp
    To replace one of these bulbs: 1. Remove the two screws holding each of the license plate lamps to the liftgate trim. 2. Turn and pull the license plate lamp forward through the liftgate trim op ...

    Setting a speed
    WARNING   Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments. Increase or decrease the set vehicle speed to a value that the prevailing ro ...