Cadillac Escalade: High-Beam On Light - Warning Lights, Gauges, and Indicators - Instruments and Controls - Cadillac Escalade Owner's ManualCadillac Escalade: High-Beam On Light

This light comes on when the high-beam headlamps are in use.

This light comes on when the high-beam headlamps are in use.

See Headlamp High/Low-Beam Changer   for more information.

    Security Light
    The security light should come on briefly as the engine is started. If the system is working normally, the indicator light turns off. If it does not come on, have the vehicle serviced by your deal ...

    Front Fog Lamp Light
    The front fog lamp light comes on when the fog lamps are in use. The light goes out when the fog lamps are turned off. See Fog Lamps   for more information. ...

    See also:

    Switching on the ignition
    To turn on the ignition without starting the engine. Ensure the brake pedal is not depressed, and with a valid Smart Key present in the vehicle, press the START/STOP button and hold until the warn ...

    Selecting off-road height
    Off-road height can be selected by pressing up on the raise/lower switch (1) at any speed up to 24 mph (40 km/h). If selected, and the speed exceeds 30 mph (50 km/h), a warning will appear in the ...

    Drive-away locking
    Drive-away locking automatically locks all the doors when the vehicle is in motion. This feature can be enabled/disabled via the Vehicle Set-up menu (see 55, INTERACTIVE CONTROLS. Note: Pressing ...