Buick Enclave: Headlamp Aiming - Vehicle Care - Buick Enclave Owner's ManualBuick Enclave: Headlamp Aiming

Headlamp aim has been preset at the factory and should need no further adjustment.

However, if your vehicle is damaged in a crash, the headlamp aim may be affected. Aim adjustment to the low-beam headlamps may be necessary if oncoming drivers flash their high-beam headlamps at you (for vertical aim).

If the headlamps need to be re-aimed, it is recommended that you take the vehicle to your dealer for service.

    Windshield Replacement
    The vehicle is equipped with an acoustic windshield. If you ever have to have the windshield replaced be sure to get an acoustic windshield so you will continue to have the benefits an acoustic wi ...

    Bulb Replacement
    For the proper type of replacement bulbs, see Replacement Bulbs . For any bulb-changing procedure not listed in this section, contact your dealer. ...

    See also:

    Imperial/metric/mixed display
    The trip computer readings can be changed between metric, imperial and mixed units in the Trip Computer menu of the message center. See 55, INTERACTIVE CONTROLS. Note: Temperature display can be ch ...

    Automatic transmission high to low range
    1. With the vehicle slowing down, and traveling between 24 mph (40 km/h) and 2 mph (3 km/h), select N. 2. Press the rear of the transfer gearbox switch to select Lo. 3. Wait for the range ch ...

    Headlamp High/Low-Beam Changer
    (Headlamp High/Low Beam Changer): To change the headlamps from low to high beam, push the lever toward the instrument panel. To return to low-beam headlamps, pull the multifunction lever toward you ...