Infiniti QX: Hazard warning flasher switch

Push the switch on to warn other drivers when you must stop or park under emergency conditions. All turn signal lights will flash.
WARNING
► If stopping for an emergency, be sure to
move the vehicle well off the road.
► Do not use the hazard warning flashers
while moving on the highway unless
unusual circumstances force you to drive
so slowly that your vehicle might become
a hazard to other traffic.
► Turn signals do not work when the
hazard warning flasher lights are on.
The flasher can be actuated with the ignition switch in any position. When an impact that could activate the supplemental air bags is detected, the hazard warning flasher lights blink automatically. If the hazard warning flasher switch is pushed twice, the hazard warning flashers will turn off.
WARNING
Do not turn the hazard warning flasher
switch to off until you can make sure that it
is safe to do so. Also, the hazard flasher
warning may not blink automatically depending
on the force of impact.
Some state laws may prohibit the use of the hazard warning flasher switch while driving.
Fog light switch
To turn the fog lights on, turn the headlight
switch to the position, then turn
the
switch to the position. To turn them
off, turn the switch to the OFF position.
The headlights must be o ...
Heated steering wheel
The heated steering wheel system is
designed to operate only when the surface
temperature of the steering wheel is below
688F (208C).
Push the heated steering wheel switch to
warm the stee ...
See also:
Refueling
Fuel filler flap
The fuel filler flap is unlocked or locked
automatically when you open or close the
vehicle with the SmartKey or using KEYLESSGO.
The position of the fuel filler cap is displaye ...
Tire pressure monitoring system
WARNING
TPMS provides a low pressure warning and does not re-inflate your tires. Tire
pressures should be checked regularly using an accurate pressure gauge when cold.
WARNING
TPMS can ...
Cleaning fabric upholstery
WARNING
Do not polish the instrument panel. Polished surfaces are reflective, and may
interfere with the drivers view.
Clean plastic or cloth faced surfaces with warm water and non-detergent ...






