Buick Enclave: Flash-to-Pass - Exterior Lighting - Lighting - Buick Enclave Owner's ManualBuick Enclave: Flash-to-Pass

This feature is used to signal to the vehicle ahead that you want to pass.

If the headlamps are off or in the low-beam position, pull the turn signal lever toward you to momentarily switch to high beams.

Release the lever to turn the high-beam headlamps off.

    Headlamp High/ Low-Beam Changer
    Headlamp High/Low-Beam Changer: Push the turn signal/lane change lever away from you to turn the high beams on. Pull the lever toward you to return to low beams. This indicator light turns on i ...

    Daytime Running Lamps (DRL)/Automatic Headlamp System
    Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day. Fully functional daytime running lamps are required on all vehicles first sold in Canada ...

    See also:

    Opening and closing the side trimpanels
    You must open the side trim panel in the cargo compartment before you can change the bulbs in the tail lamps. Left-hand side trim panel ► To open: turn release knob 1 90° in the directio ...

    Troubleshooting guide
    The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution ...

    Trailer towing
    When you attach a trailer, make sure you have correctly established the electrical connection. This can be accomplished by checking the trailer lighting. In this event, Blind Spot Assist is deact ...