Range Rover: Fitting the detachable tow hitch
1. Remove the protective cover from the tow hitch and stow it in the tow hitch stowage area.
2. The tow hitch can only be installed when the green locking lever is in the unlocked position.
3. Insert the tow hitch into the mounting and push firmly upwards until the tow hitch locks into position.
4. The red marker must be completely covered by the green locking lever.
5. Turn the key counterclockwise to lock the tow hitch and remove the key before towing.
Tow hitch
WARNING When handling the tow hitch, hold the bottom of the component. Locking into position occurs automatically and causes the locking lever to rotate under spring pressure. The tow hitch i ...Removing the detachable tow hitch
Removal of the tow hitch is the reverse of fitting. Note: The key cannot be removed when the tow hitch has been detached. ...See also:
Important safety notes
WARNING
For safety reasons, switch off the windshield
wipers and remove the key from the ignition
lock before changing the wiper blades
(vehicles with KEYLESS-GO: make sure that
the o ...
Vehicle identification plate withvehicle identification number (VIN)and paint code number
► Open the driver's door.
You will see vehicle identification plate 1.
Example: vehicle identification plate (USA only)
2 Paint code
3 VIN
Example: vehicle identification plate (Can ...
Lamps On Reminder
This light comes on whenever the parking lamps are on.
See Exterior Lamp Controls for more information. ...