Buick Enclave: Engine Oil Life System
The engine oil life system calculates engine oil life based on vehicle use and displays the CHANGE ENGINE OIL SOON message when it is time to change the engine oil and filter.
The oil life system should be reset to 100% only following an oil change.
Resetting the Oil Life System
1. Turn the ignition to ON/RUN, with the engine off.
2. Press the vehicle information button until OIL LIFE REMAINING displays.
3. Press and hold the set/reset button until “100%” is displayed.
Three chimes sound and the CHANGE ENGINE OIL SOON message goes off.
4. Turn the key to LOCK/OFF.
See Engine Oil Life System .
Tire Sealant and Compressor Kit
This vehicle may come with a spare tire and tire changing equipment or a tire
sealant and compressor kit.
The kit can be used to temporarily seal small punctures in the tread area of
the tire.
S ...
Driving for Better Fuel Economy
Driving habits can affect fuel mileage. Here are some driving tips to get the
best fuel economy possible.
► Avoid fast starts and accelerate smoothly.
► Brake gradually and avoid abrup ...
See also:
Intelligent Cruise Control (ICC) system (if so equipped)
The Intelligent Cruise Control (ICC) system
automatically maintains a selected distance
from the vehicle traveling in front of
you according to that vehicle’s speed (up
to the set speed), or ...
Trailer electrical connection
NOTICE
Only connect approved electrical circuits, which are in good condition, to the
trailer socket.
When a trailer electrical connection is made, and the vehicle’s direction indicators ...
Stowing the changed wheel
WARNING
Do not stow the wheel while the vehicle is raised on the jack.
NOTICE
Do not use power tools to raise the spare wheel. Doing so may damage the mechanism.
1. Place the wheel und ...
