Range Rover: Emergency key - Entering the vehicle - Range Rover Owner's ManualRange Rover: Emergency key

Note: There are two designs of Smart Key, refer to the information which is relevant

Note: There are two designs of Smart Key, refer to the information which is relevant to the design of Smart Key supplied with the vehicle.

A. Press emergency key release button and pull out side cover to release the key.

B. Slide and remove cover to expose the emergency key.

1. Insert the key blade into the slot at the base of the door lock cover and

1. Insert the key blade into the slot at the base of the door lock cover and gently lever the key blade upwards.

Carefully twist the key blade, to lever the cover off the retaining clips.

2. Insert the key blade into the exposed lock to operate.

If the vehicle is unlocked using the emergency key blade with the security system armed, the alarm will sound when the door is unlocked. The alarm will continue to sound until the remote key fob is positioned correctly. See 74, IF THE ENGINE FAILS TO START.

    Unlocking the vehicle
    WARNING To prevent accidental or unauthorized operation, never leave the Smart Key unattended in the vehicle. Never leave children or animals unattended in the vehicle. The vehicle can be ...

    Global opening
    Press and hold the unlock button for 3 seconds to unlock the vehicle and open all of the windows. To cancel global opening, press any of the buttons on the smart key or operate the driver’s win ...

    See also:

    Rear Seat Entertainment (RSE) System (Headrest DVD)
    Vehicles with an RSE system include two head restraint video display screens with integrated DVD players, auxiliary inputs, two wireless headphones, and a remote control. This system works independe ...

    Cockpit
    1 Combination switch 2 Cruise control lever 3 Instrument cluster 4 Horn 5 Steering wheel paddle shifters 6 DIRECT SELECT lever 7 PARKTRONIC warning display 8 Overhead control panel 9 ...

    Power steering fluid
    Check the fluid level in the reservoir. The fluid level should be checked using the HOT range (1 : HOT MAX., 2 : HOT MIN.). at fluid temperatures of 122 to 1768F (50 to 808C) or using the CO ...