Towing Equipment

Hitches It is important to have the correct hitch equipment. Crosswinds, large trucks going by, and rough roads are a few reasons why the right hitch is needed. ► The rear bumper on the vehi ...

Add-On Electrical Equipment

Notice: Do not add anything electrical to the vehicle unless you check with your dealer first. Some electrical equipment can damage the vehicle and the damage would not be covered by the vehicle& ...

See also:

Measurement of weights
Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels separately to ...

Using the 3.5mm (1/8 in) Auxiliary Input Jack
The auxiliary input jack is located on the lower right side of the faceplate. This is not an audio output; do not plug a headphone set into the front auxiliary input jack. Connect an auxiliary inpu ...

4WD shift switch
► Shift the 4WD shift switch to either the AUTO, 4H or 4L position, depending on driving conditions. ► With the switch set to the AUTO position, distribution of torque to the front ...