Range Rover: Changing the follow mode set gap - Adaptive cruise control - Range Rover Owner's ManualRange Rover: Changing the follow mode set gap

Range Rover / Range Rover Owner's Manual / Adaptive cruise control / Changing the follow mode set gap

Four gap settings are available. The selected gap setting is displayed on the message center when the gap adjustment buttons are operated.

Each gap level is indicated by an additional chevron in front of the vehicle icon in the message center. After the ignition is switched on, the default gap (gap level 3) will be automatically selected ready for ACC operation.

Note: It is the driver’s responsibility to select a gap appropriate to the driving conditions.

    Entering follow mode
    WARNING When in follow mode, the vehicle will not decelerate automatically to a stop, nor will the vehicle always decelerate quickly enough to avoid a collision. Note: Follow mode is an integ ...

    Overriding the speed and follow mode
    Whenever the driver is overriding the ACC by depressing the accelerator pedal, the ACC will not automatically apply the brakes to maintain separation from any vehicle ahead. The set speed and gap ...

    See also:

    Convenience Net
    For vehicles with a convenience net in the rear, use it to store small loads as far forward as possible. The net should not be used to store heavy loads. ...

    Tire Pressure Monitor Operation
    This vehicle may have a Tire Pressure Monitor System (TPMS). The TPMS is designed to warn the driver when a low tire pressure condition exists. TPMS sensors are mounted onto each tire and wheel asse ...

    Battery Replacement
    Replace the battery if the REPLACE BATTERY IN REMOTE KEY message displays in the DIC. See “REPLACE BATTERY IN REMOTE KEY” under Key and Lock Messages   for additional information. Noti ...