Infiniti QX: Brake booster
Check the brake booster function as follows: 1. With the engine off, depress and release the foot brake pedal more than 20 times. When the foot brake pedal movement (distance of travel) remains the same from one pedal application to the next, continue on to the next step. 2. While depressing the foot brake pedal, start the engine. 3. With the foot brake pedal depressed, stop the engine. Keep the pedal depressed for about 30 seconds. 4. Run the engine for 1 minute without depressing the foot brake pedal, then turn it off. Depress the foot brake pedal several times. The pedal travel distance will decrease gradually with each depression as the hydraulic pressure decreases. If the brakes do not operate properly, have the brakes checked by an INFINITI retailer.
Brake pad wear warning
The disc brake pads have audible wear
warnings. When a brake pad requires
replacement, it will make a high pitched
scraping sound when the vehicle is in
motion. This scraping sound will first ...
Fuses
Engine compartment ...
See also:
Weight of the Trailer
How heavy can a trailer safely be?
It depends on how the rig is used. Speed, altitude, road grades, outside temperature
and how much the vehicle is used to pull a trailer are all important. It can d ...
Vehicle
Display messages
Shift to P or N
to start engine.
Possible causes/consequences and ►
Solutions
You have attempted to start the engine with the transmission in
position R or D.
► Sh ...
Driver override options
Hill Descent Control (HDC) is automatically engaged for some terrain response
programs. If required, HDC can be deselected or engaged independently of terrain
response.
The HDC status will be dis ...