Cadillac Escalade: Brake Assist
This vehicle has a brake assist feature designed to assist the driver in stopping or decreasing vehicle speed in emergency driving conditions. This feature uses the stability system hydraulic brake control module to supplement the power brake system under conditions where the driver has quickly and forcefully applied the brake pedal in an attempt to quickly stop or slow down the vehicle. The stability system hydraulic brake control module increases brake pressure at each corner of the vehicle until the ABS activates. Minor brake pedal pulsation or pedal movement during this time is normal and the driver should continue to apply the brake pedal as the driving situation dictates. The brake assist feature will automatically disengage when the brake pedal is released or brake pedal pressure is quickly decreased.
Parking Brake
Set the parking brake by holding the regular brake pedal down, then pushing down
the parking brake pedal.
If the ignition is on, the brake system warning light will come on. See Brake
System Warn ...
Hill Start Assist (HSA)
Non-hybrid vehicles with StabiliTrak have a Hill Start Assist (HSA) feature,
which may be useful when the vehicle is stopped on a grade. This feature is designed
to prevent the vehicle from rolling, ...
See also:
Danger, Warnings, and Cautions
WARNING messages found on vehicle labels and in this manual describe hazards
and what to do to avoid or reduce them.
Danger indicates a hazard with a high level of risk which will result in seri ...
Emergency engine shut off
To shut off the engine in an emergency
situation while driving, perform the following
procedure:
► Rapidly push the push-button ignition
switch 3 consecutive times in less than
1.5 sec ...
Type approval numbers
The TPMS devices comply with part 15 of the FCC rules and IC - RSS-210. Operation
is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this devic ...
