Cadillac Escalade: Automatic Transmission Shift Lock Control Function Check - Vehicle Checks - Vehicle Care - Cadillac Escalade Owner's ManualCadillac Escalade: Automatic Transmission Shift Lock Control Function Check

Cadillac Escalade / Cadillac Escalade Owner's Manual / Vehicle Care / Vehicle Checks / Automatic Transmission Shift Lock Control Function Check

WARNING WARNING

When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.

1. Before starting this check, be sure there is enough room around the vehicle. It should be parked on a level surface.

2. Firmly apply the parking brake. See Parking Brake  .

Be ready to apply the regular brake immediately if the vehicle begins to move.

3. With the engine off, turn the ignition on, but do not start the engine. Without applying the regular brake, try to move the shift lever out of P (Park) with normal effort. If the shift lever moves out of P (Park), contact your dealer for service.

    Starter Switch Check
    WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room ar ...

    Ignition Transmission Lock Check
    While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. The ignition should turn to LOCK/OFF only when the shift lever is in P (Park). ...

    See also:

    Lamp check
    A bulb check is initiated for some warning lamps when the ignition is switched on and lasts for 3 seconds (except for the air bag warning lamp which remains illuminated until the engine is started ...

    Full screen view controls
    The seek controls operate in the same manner as they do in preview mode. Use the relevant soft key to select the 4:3, 16:9 or Zoom option. ...

    HDC operation
    With HDC engaged, the speed of descent can be altered using the cruise control steering wheel switches, as follows: • To increase speed press and hold the + switch (2) until the desired speed ...