Mercedes-Benz GL-Class: ATA (Anti-Theft Alarm system)
A visual and audible alarm is triggered if the alarm system is armed and you open:
• a door
• the vehicle with the mechanical key
• the tailgate
• the hood
The alarm is not switched off, even if you close the open door that has triggered it, for example.
If the alarm stays on for more than 30
seconds, the emergency call system
mbrace (USA only) or TELE AID (Canada
only) initiates a call to the Customer
Assistance Center automatically. The
emergency call system initiates the call
provided that:
• you have subscribed to the mbrace/TELE
AID service.
• the mbrace/TELE AID service has been
activated properly.
• the required mobile phone, power supply
and GPS are available.
► To arm: lock the vehicle with the SmartKey or KEYLESS-GO.
Indicator lamp 1 flashes. The alarm system is armed after approximately 10 seconds.
► To deactivate: unlock the vehicle with the SmartKey or KEYLESS-GO.
X To stop the alarm using the SmartKey:
insert the SmartKey into the ignition lock.
The alarm is switched off.
or
► Press the
button on the
SmartKey.
The alarm is switched off.
► To stop the alarm using KEYLESS-GO:
grasp the outside door handle. The SmartKey must be outside the vehicle.
The alarm is switched off.
or
► Press the Start/Stop button on the
dashboard. The SmartKey must be inside
the vehicle.
The alarm is switched off.
Immobilizer
The immobilizer prevents your vehicle from
being started without the correct SmartKey.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. The
engine can be started ...
Opening/closing
...
See also:
Tire pressure specifications
WARNING
Follow recommended tire inflation pressures.
Do not underinflate tires. Underinflated tires
wear excessively and/or unevenly, adversely
affect handling and fuel economy, and ...
Park Tilt Mirrors
If the vehicle has the memory package, the passenger and/or driver mirror tilts
to a preselected position when the vehicle is in R (Reverse). This feature lets
the driver view the curb when parallel ...
Activating/deactivating the residualheat function
It is possible to make use of the residual heat
of the engine to continue heating the
stationary vehicle for up to 30 minutes after
the engine has been switched off. The heating
time depends on th ...