Cadillac Escalade: Antilock Brake System (ABS) Warning Light - Warning Lights, Gauges, and Indicators - Instruments and Controls - Cadillac Escalade Owner's ManualCadillac Escalade: Antilock Brake System (ABS) Warning Light

For vehicles with the Antilock Brake System (ABS), this light comes on briefly

For vehicles with the Antilock Brake System (ABS), this light comes on briefly when the engine is started.

If it does not, have the vehicle serviced by your dealer. If the system is working normally the indicator light then goes off.

If the ABS light stays on, turn the ignition off. If the light comes on while driving, stop as soon as it is safely possible and turn the ignition off. Then start the engine again to reset the system. If the ABS light stays on, or comes on again while driving, the vehicle needs service. If the regular brake system warning light is not on, the vehicle still has brakes, but not antilock brakes.

If the regular brake system warning light is also on, the vehicle does not have antilock brakes and there is a problem with the regular brakes. See Brake System Warning Light  .

For vehicles with a Driver Information Center (DIC), see Brake System Messages   for all brake-related DIC messages.

If the vehicle is a hybrid, see the hybrid supplement for more information.

    Brake System Warning Light
    With the ignition on, the brake system warning light comes on when the parking brake is set. If the vehicle is driven with the parking brake engaged, a chime sounds when the vehicle speed is greater ...

    Tow/Haul Mode Light
    For vehicles with the Tow/Haul Mode feature, this light comes on when the Tow/Haul Mode has been activated. For more information, see Tow/Haul Mode  . ...

    See also:

    Windows
    Premium Trim Shown, Up-Level Similar The driver door has switches that control all windows, the passengers door switch only control that window. The power windows work when the ignition is in ON/R ...

    Setting the specified minimum distance
    You can set the specified minimum distance for DISTRONIC by varying the time span between one and two seconds. This time span determines the distance that DISTRONIC should maintain from the vehicl ...

    Using RSE
    The system is operated using the remote control. To release the remote from the docked position, press at the top of the remote to unlatch it. NOTICE Do not attempt to pull the remote contro ...