Mercedes-Benz GL-Class: Adjusting luxury head restraints
WARNING 
When folding back the side cushions, never
reach between the side cushion and the
mounting post. You could otherwise be
trapped.
► To adjust the side bolsters of the head restraint: push or pull right and/or lefthand side bolster 1 into the desired position.
► To adjust the angle of the head restraint: push or pull the head restraint in the direction of arrow 2.
Adjusting the head restraint heightelectrically
► To adjust the head restraint height:
slide
the switch for head restraint adjustment up or down in the direction of
the arrow. ...
Rear seat head restraints
WARNING
For safety reasons, always drive with the rear
head restraints in the upright position when
the rear seats are occupied.
Keep the area around head restraints clear of
articles ...
See also:
Attaching the front towing eye
The front towing point is located behind a removable cover in the lower front
bumper.
1. Rotate each of the fasteners 90 degrees counter-clockwise with a coin (or
similar).
2. To remove the co ...
Quick poi selection
Touch the Map screen to display the POI button. Touch the POI (Point of interest)
button. The screen shows six suggested categories, five of which can be selected
as quick points of interest.
Not ...
Storing the Tire Sealant and Compressor Kit
The tire sealant and compressor kit is located under the storage tray on the
driver side trim panel (over the rear wheelhouse).
To access the tire sealant and compressor kit:
1. Remove the tray b ...
