Mercedes-Benz GL-Class: Activating/deactivating climatecontrol
Important information
WARNING
When the climate control system is
deactivated, the outside air supply and
circulation are also deactivated. Only choose
this setting for a short time. Otherwise the
windows could fog up, impairing visibility and
endangering you and others.
Switch on climate control primarily using the button.
Switching the front climate control on/off using the front control panel
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on: press the
button.
The indicator lamp in the button
lights
up. Airflow and air distribution are set to
automatic mode.
or
► Press the
button.
The indicator lamp in the button goes out. The previously selected settings come into effect again.
► To switch off: press the button.
The indicator lamp in the button lights up.
Switching the rear-compartment climate control on/off using the front control panel
2-zone automatic climate control
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on/off: press the
button.
The indicator lamp in the button lights up or goes out.
3-zone automatic climate control
USA only:
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on/off: press the
button.
The indicator lamp in the button lights up or goes out.
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on: press the
button.
ON and MODE are shown in the automatic climate control display behind the symbol. The MODE display goes out after three seconds. The display switches back to the standard display.
► To switch off: press the
button.
MODE is shown in the display behind the
symbol.
► Press button
.
OFF is shown in the display behind the symbol.
Switching the rear-compartment climate control on/off using the rear control panel
3-zone automatic climate control
► Turn the SmartKey to position 2 in the
ignition lock.
► Switch on automatic climate control using
the front control panel.
► To switch on: press the
button.
The indicator lamp in the button lights up.
► To switch off: press the button.
The indicator lamp in the button lights up.
Activating/deactivating cooling with air dehumidification
Important information The cooling with air dehumidification function is only available when the engine is running. The air inside the vehicle is cooled and dehumidified according to the temperat ...See also:
Using ABS
Do not pump the brakes. Just hold the brake pedal down firmly and let ABS work.
You might hear the ABS pump or motor operating and feel the brake pedal pulsate,
but this is normal. ...
Care of Your CDs and DVDs
Sound quality can be reduced due to disc quality, recording method, quality of
the music recorded, and how the disc has been handled. Handle discs carefully and
store them in their original cases or ...
Checking Engine Oil
It is a good idea to check the engine oil level at each fuel fill. In order to
get an accurate reading, the vehicle must be on level ground. The engine oil dipstick
handle is a yellow loop. See Engi ...