Cadillac Escalade: Security Light - Warning Lights, Gauges, and Indicators - Instruments and Controls - Cadillac Escalade Owner's ManualCadillac Escalade: Security Light

The security light should come on briefly as the engine is started. If the system

The security light should come on briefly as the engine is started. If the system is working normally, the indicator light turns off. If it does not come on, have the vehicle serviced by your dealer.

If the light stays on and the engine does not start, there could be a problem with the theft-deterrent system.

This light is also used to indicate the status of the anti-theft alarm system when the ignition is turned off. The light will flash rapidly if the alarm system is arming and one or more of the monitored entry points is not closed. The light will stay on if the alarm is arming and all entry points are closed.

For information regarding this light and the vehicle's security system, see Anti-theft Alarm System  .

    Engine Oil Pressure Light
    Notice: Lack of proper engine oil maintenance can damage the engine. Driving with the engine oil low can also damage the engine. The repairs would not be covered by the vehicle warranty. Check the ...

    High-Beam On Light
    This light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer   for more information. ...

    See also:

    Headlamp removal
      WARNING Do not attempt to change any bulb with the lighting switch on. If the lighting has just been switched off, give the bulbs time to cool down. Handling them in a hot conditio ...

    Rear Wiper Blade Replacement
    1. Lift the wiper blade assembly up and out of the park rest position. 2. Pull the wiper blade assembly away from the backglass. The backglass wiper blade will not lock in a vertical position, so ...

    Hill descent
    With Hill Descent Control (HDC) selected in either automatic, Sport or CommandShift modes, a low gear will be selected and maintained to provide maximum engine braking. Should the gear lever be mo ...