Cadillac Escalade: Resetting the Power Folding Mirrors - Power Mirrors - Exterior Mirrors - Keys, Doors, and Windows - Cadillac Escalade Owner's ManualCadillac Escalade: Resetting the Power Folding Mirrors

Reset the power folding mirrors if:

  • The mirrors are accidentally obstructed while folding.
  • They are accidentally manually folded/unfolded.
  • The mirrors will not stay in the unfolded position.
  • The mirrors vibrate at normal driving speeds.

Fold and unfold the mirrors one time using the mirror controls to reset them to their normal position. A popping noise may be heard during the resetting of the power folding mirrors. This sound is normal after a manual folding operation.

See Power Mirrors  .

    Power Folding Mirrors
    To fold the mirrors: 1. Press (C) to fold the mirrors out to the driving position. 2. Press (D) to fold the mirrors into the folded position. ...

    Turn Signal Indicator
    The vehicle has a turn signal indicator on the mirror. An arrow on the mirror flashes in the direction of the turn or lane change. ...

    See also:

    Vehicle identification p
    Even if you have calculated the total load carefully, you should still make sure that the gross vehicle weight rating and the gross axle weight rating are not exceeded. Details can be found on the ...

    Side windows
    Important safety notes WARNING   When opening or closing the windows, make sure there is no danger of anyone being harmed by the opening/closing procedure. The door windows are equipped ...

    Opening and closing windows with the mechanical key
    The driver’s door key operation also allows you to open and close all door windows. To open the windows, turn the driver’s door key cylinder to the rear of the vehicle for longer than 1 se ...