Buick Enclave: Radio(s)
Radio with CD, DVD, and USB Port
: Press to turn the system on and
off. Turn to increase or decrease the volume.
BAND: Press to choose between FM, AM, or XM™, if equipped.
: Select radio stations.
Seek or scan stations.
: Change the display between the
radio station frequency and the time, if equipped. While the ignition is off, press
to display the time.
For more information about these and other radio features, see Operation .
For vehicles with a Rear Seat Entertainment (RSE) System and Rear Seat Audio (RSA) System, see Rear Seat Entertainment (RSE) System and Rear Seat Audio (RSA) System for more information.
Storing a Favorite Station
► maximum of 36 stations can be stored as favorites using the six softkeys located below the radio station frequency tabs and by using the radio FAV button. Press FAV to go through up to six pages of favorites, each having six favorite stations available per page.Each page of favorites can contain any combination of AM, FM, or XM stations.
See AM-FM Radio .
Setting the Clock
To set the time and date for the radio with CD, DVD, and USB Port:
1. Turn the ignition key to ACC/ACCESSORY or ON/RUN, then press
to turn the radio on.
2. Press to display HR, MIN, MM, DD,
YYYY (hour, minute, month, day, and year).
3. Press the pushbutton located under any one of the labels to be changed.
4. To increase or decrease the time or date, turn
clockwise or counterclockwise.
For detailed instructions on setting the clock for the vehicle's specific audio system, see Clock .
Vehicle Features
...
Satellite Radio
Vehicles with an XM™ satellite radio tuner and a valid XM satellite radio subscription
can receive XM programming.
XM Satellite Radio Service
XM is a satellite radio service based in the 48 cont ...
See also:
Voltmeter
When the ignition switch is pushed to the
ON position, the volt meter indicates the
battery voltage. When the engine is running,
it indicates the generator voltage.
While cranking the engine ...
Wood Panels
Use a clean cloth moistened in warm, soapy water (use mild dish washing soap).
Dry the wood immediately with a clean cloth. Keep belts clean and dry.
WARNING
Do not bleach or dye safety belts. ...
Connecting a starting aid
To start the vehicle using a starting aid or a slave battery, follow the instructions
in the sequence given.
1. Connect the positive (Red) booster cable to the positive battery terminal
of the di ...