Range Rover: Manual gear selection
When D is selected, manual mode may be temporarily accessed by operating the steering wheel mounted shift paddles.
While in D, temporary manual mode will be held while the driver is accelerating, decelerating, cornering or continuing to request shifts via the paddles.
If continual use of manual mode is required, select S, to enter permanent manual mode.
Commandshift
If CommandShift™ is selected in high range, gears 1 or 2 may be used for moving
off from stationary. In low range, gears 1, 2 or 3 may be used, which may prove
useful in certain off-road driving ...
Hill descent
With Hill Descent Control (HDC) selected in either automatic, Sport or CommandShift
modes, a low gear will be selected and maintained to provide maximum engine braking.
Should the gear lever be mo ...
See also:
Removing the Third Row Seat
To remove the seat:
1. Open the liftgate to access the controls for the seat.
2. Fold the seatbacks forward using lever “1” and the instructions listed previously
under “Folding the Seatback. ...
Telephone compatibility
Please refer to the Ownership section of the Land Rover website at www.landrover.com,
for a list of compatible phones.
Note: The Bluetooth® equipped phones listed on landrover.com have been tested ...
Checking engine oil level
1. Park the vehicle on a level surface and
apply the parking brake.
2. Run the engine until it reaches operating
temperature.
3. Turn off the engine. Wait more than 15
minutes for the oil ...
