Cadillac Escalade: Making Turns
Notice: Making very sharp turns while trailering could cause the trailer to come in contact with the vehicle. The vehicle could be damaged. Avoid making very sharp turns while trailering. When turning with a trailer, make wider turns than normal. Do this so the trailer will not strike soft shoulders, curbs, road signs, trees or other objects. Avoid jerky or sudden maneuvers. Signal well in advance.
If the trailer turn signal bulbs burn out, the arrows on the instrument panel will still flash for turns. It is important to check occasionally to be sure the trailer bulbs are still working.
Backing Up
Hold the bottom of the steering wheel with one hand. Then, to move the trailer
to the left, move that hand to the left. To move the trailer to the right, move
your hand to the right. Always back up ...
Driving on Grades
Reduce speed and shift to a lower gear before starting down a long or steep downgrade.
If the transmission is not shifted down, the brakes might get hot and no longer
work well.
Vehicles can tow in ...
See also:
Important safety notes
WARNING
Grains of sand, particles of dirt and other
abrasive materials can enter the brake system. This can lead to excessive wear
and
unpredictable braking efficiency.
After the bra ...
Ascending steep slopes
When ascending steep slopes with HDC selected, the vehicle will allow full control
to the driver in the normal manner. If HDC is switched off, the maximum vehicle
speed will be limited to allow mo ...
Tire pressure label
The recommended tire pressures are listed on a label located in the driver’s
door opening. These pressures provide optimum ride and handling characteristics
for all normal operating conditions ...
