Universal Remote System Operation

Press and hold the appropriate button for at least half of a second. The indicator light will come on while the signal is being transmitted. Reprogramming Universal Home Remote Buttons Any of the t ...

Exterior Lighting

...

See also:

Entering follow mode
WARNING When in follow mode, the vehicle will not decelerate automatically to a stop, nor will the vehicle always decelerate quickly enough to avoid a collision. Note: Follow mode is an integ ...

Clearing the programmed information
Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20 seconds) ...

Capacities
The quoted capacities are approximate and provided as a guide only. All oil levels must be checked using level plugs, driver information module or drain and refill, as applicable. ...